General Features

  • Ergonomic, easy-to-use design suitable for general surgical interventions
  • Table for; up / down, back portion, ease of providing right / left lateral and horizontal forward / backward slide movements silently and vibration-free with hand control, body control or optional foot control
  •  Ease of manual movement of foot parts with gas piston
  • Electro-hydraulic power control system
  • Different patient positions and C-arm X-ray device in accordance with the movement of design
  • All accessories can be stuck fixing the rail system
  • Radiographic table top set made of compact laminate material
  • Spare control system on the table
  • The ability to be mounted instead of the title of the foot section
  • The cushion on the table is multi-layer visco; Antistatic, liquid-proof and antibacterial property
  • It is 60mm thick
  • It does not any liquid, including blood.
  • 30-60 minutes of Use (average 200 motion) in power outages (12 A/hour – 24 VDC) with fast charging and maintenance-free battery system.


  • The upper carrier plate of aluminium, AISI 304 stainless steel lower trunk and coating the bottom plate and the carrier body is manufactured from material GGG 40.
  • There is a silent and vibration-free electro-hydraulic motor system that provides movements suitable for different patient positions.
  • The ability to move a parallel shape to the floor except the head and foot, by pressing a single button on the hand control.
  • The ability to get the desired positions into memory.
  • Can be fixed to the floor by electro-hydraulic pistons controlled by four-point hand control and body control.
  • The ability to perform flex and reflex movements with one key on the hand control.
  • The ability of the hand control to display table movements on the LCD screen.
  • The keys on the hand control feature backlight.
  • Stand-by feature in cases where the table is not used.
  • The ability to activate when the hand control is removed in stand-by mode.
  • The ability to show motion angles on the hand control.

Technical Specifications

Height: 530-1000 mm

Height (with cushion): 536-1066 mm

Stroke: 470 mm

Table Parts: 5 part

Head section: 236 x 520 mm

Back section: 480 x 520 mm

Kidney Elevator (Optional): 120 x 620 mm

Living section: 580 x 520 mm

Leg Section: 240 x 605 mm

Length: 2000 mm

Width (including rails): 572 mm

Width (excluding rails): 520 mm

Lifting Capacity: 500 kg

Battery: 2 pcs, 12V, 12Ah, Fast charge, dry type, maintenance free, Capacity 12A / h

Battery Charge Voltage: 24 V DC

Mains / Generator Input Voltage: 230V, 50 / 60Hz

Reset: One-button table top with the exception of head and leg sections is made parallel to the ground.


Head section : 90 ° up, 90 ° down, removable

Back Section : 80° up, 30° down

Leg Section : 30 ° up, 90 ° down, 90 ° can be opened sideways, removable

Tilt: 24 ° right, 24 ° left

Flex: 210 °

Reflex: 100 °

Sliding: 360 mm

Trendelenburg: 30 °

Reverse Trendelenburg: 30 °

Kidney Elevator: 120 mm up


  • IV pole
  • Anesthesia Frame
  • Body Belt
  • Arm Support
  • Shoulder Support
  • Foot / Knee Support
  • Side / Body Support
  • Clamp, small size
  • Clamp, large size (for Leg Support)
  • Wrist Belt
  • Leg Belt
  • Side Safety Rail
  • Accessory Table
  • Arm Support, for arm operations

Model Characteristics

Zeroing: ✓

Foot Piece Hydraulic Movements: ✓

Sliding Movement: ✓

Trendelenburg: ✓

Flex: ✓

Tilt: ✓

Hydraulic Locking System: ✓

Back Piece: ✓

Down Up: ✓

Exhibitions and Meetings