- Ergonomic, easy-to-use design suitable for general surgical interventions
- Table for; up / down, back portion, ease of providing right / left lateral and horizontal forward / backward slide movements silently and vibration-free with hand control, body control or optional foot control
- Ease of manual movement of foot parts with gas piston
- Electro-hydraulic power control system
- Different patient positions and C-arm X-ray device in accordance with the movement of design
- All accessories can be stuck fixing the rail system
- Radiographic table top set made of compact laminate material
- Spare control system on the table
- The ability to be mounted instead of the title of the foot section
- The cushion on the table is multi-layer visco; Antistatic, liquid-proof and antibacterial property
- It is 60mm thick
- It does not any liquid, including blood.
- 30-60 minutes of Use (average 200 motion) in power outages (12 A/hour – 24 VDC) with fast charging and maintenance-free battery system.
- The upper carrier plate of aluminium, AISI 304 stainless steel lower trunk and coating the bottom plate and the carrier body is manufactured from material GGG 40.
- There is a silent and vibration-free electro-hydraulic motor system that provides movements suitable for different patient positions.
- The ability to move a parallel shape to the floor except the head and foot, by pressing a single button on the hand control.
- The ability to get the desired positions into memory.
- Can be fixed to the floor by electro-hydraulic pistons controlled by four-point hand control and body control.
- The ability to perform flex and reflex movements with one key on the hand control.
- The ability of the hand control to display table movements on the LCD screen.
- The keys on the hand control feature backlight.
- Stand-by feature in cases where the table is not used.
- The ability to activate when the hand control is removed in stand-by mode.
- The ability to show motion angles on the hand control.
Height: 530-1000 mm
Height (with cushion): 536-1066 mm
Stroke: 470 mm
Table Parts: 5 part
Head section: 236 x 520 mm
Back section: 480 x 520 mm
Kidney Elevator (Optional): 120 x 620 mm
Living section: 580 x 520 mm
Leg Section: 240 x 605 mm
Length: 2000 mm
Width (including rails): 572 mm
Width (excluding rails): 520 mm
Lifting Capacity: 500 kg
Battery: 2 pcs, 12V, 12Ah, Fast charge, dry type, maintenance free, Capacity 12A / h
Battery Charge Voltage: 24 V DC
Mains / Generator Input Voltage: 230V, 50 / 60Hz
Reset: One-button table top with the exception of head and leg sections is made parallel to the ground.
Head section : 90 ° up, 90 ° down, removable
Back Section : 80° up, 30° down
Leg Section : 30 ° up, 90 ° down, 90 ° can be opened sideways, removable
Tilt: 24 ° right, 24 ° left
Flex: 210 °
Reflex: 100 °
Sliding: 360 mm
Trendelenburg: 30 °
Reverse Trendelenburg: 30 °
Kidney Elevator: 120 mm up
- IV pole
- Anesthesia Frame
- Body Belt
- Arm Support
- Shoulder Support
- Foot / Knee Support
- Side / Body Support
- Clamp, small size
- Clamp, large size (for Leg Support)
- Wrist Belt
- Leg Belt
- Side Safety Rail
- Accessory Table
- Arm Support, for arm operations
Hydraulic Locking System: ✓
Back Piece: ✓
Down Up: ✓